- Sensor: ZK small-sized sensor
- Communication: RS485
- Standard Functions: ID Card Module
- Optional Functions: IC Card Module
- Voice Prompt: Buzzer
- Power Supply: 12V DC
- Operating Temperature: 0°C ~ 45°C
- Ingress Protection Rating: IP65
- Dimension: 102 x 50 x 37mm (H*W*D)
• 24*10/100M RJ-45(PoE) +2*10/100M RJ-45+2*1000 SFP
• Complies with IEEE 802.3, IEEE 802.3u and IEEE802.3af/at
• Maximum PoE power is 15.4 W (IEEE 802.3af )/ 30 W (IEEE 802.3at)
• 250 meters PoE power and data transmission distance (Cat 6)
• MDI/MDIX self-adaption
• Store and forward switching
• Lightning protection
The PE162-200-C is an advanced switch that provides a network point for data transmission and power supply.
It has 16 PoE ports that can provide IEEE802.3af/at standard power through network cables.
The PE082-120-C is an advanced switch that provides a network point for data transmission and power supply.
It has 8 PoE ports that can provide IEEE802.3af/at standard power through network cables.
The PE041-55-C is an advanced switch that provides a network point for data transmission and power supply.
It has 4 PoE ports that can provide IEEE802.3 af/at standard power through network cables.
- Sensor: ZKTeco Infrared Optical Sensor
- Communication: RS485
- Built-in Card Reader: 125 kHz EM card reader, Optional IC Card reader
- Optional Functions: IC Card Module
- Power Supply: DC 12V
- Operating Temperature: 0°C ~ 45°C
- Operating Humidity: 20% ~ 80%
- Dimension: 88mm × 88mm × 33.6mm
[wpdm_package id='5856']
- Model:1 Gang: SW11-US 2 Gang: SW12-US 3 Gang: SW13-US
- Input Voltage: AC 100-240V 50/60Hz
- Output Voltage: AC 90-250V 50/60Hz
- Maximum Current: 10A
- Rated Power: 600W/gang
- Standby Power Consumption :< 0.5W/h
- Wireless Protocol: 802.11 b/g/n 2.4GHz Wi-Fi
- Material: PC flame resistant material
- Dimensions: 76*120*30mm
- Certifications: FCC
- Working Humidity: ≤ 95%
- Working Temperature: -20°C ~ 70°C
Material: PC+ABS
Electrical: Input 100 - 240V AC, 50/60Hz
Maximum Load: 10A Resistive
Maximum Power: 2400W
Wireless Protocol: 802.11 b/g/n 2.4GHz
• Commercial standard switch with 2 layers of network artribute
• 250 meters of PoE transmission distance of power and data
• Max. PoE power output 30W for each port
• Conforms to IEEE 802.3i, IEEE 802.3u and IEEE 802.3X
• Conforms to IEEE 802.3af and IEEE 803.3at
• MDI/MDIX self-adaptation
• Lightning protection System Overview PE04-60 provides a simple network for IP cameras installation, which could run data and power transmission through CAT 5E / 6 cables at the same time. It also supports long transmission distance of 250 meters to save cost for projects to replace extenders, fibers, and coaxial cables, etc.
• Commercial standard switch with 2 layers of network artribute
• 250 meters of PoE transmission distance of power and data
• Max. PoE power output 30W for each port
• Conforms to IEEE 802.3i, IEEE 802.3u and IEEE 802.3X
• Conforms to IEEE 802.3af and IEEE 803.3at • MDI/MDIX self-adaptation
• Lightning protection System Overview PE08-120 provides a simple network for IP cameras installation, which could run data and power transmission through CAT 5E / 6 cables at the same time. It also supports long transmission distance of 250 meters to save cost for projects to replace extenders, fibers, and coaxial cables, etc.
• 24 10 / 100BaseT RJ45 ports
• 2 sets of 10 / 100 / 1000M gigabyte combo ports
• The total power budget is 400W, and the max. PoE power output is 30W
• Support IP-MAC-Port-VID binding ARP / IP / DoS defend, 802.1X authentication
• Support IEEE802.1Q VLAN, OoS, ACL, spanning-tree, and multicast
• Support port security, port monitoring, port isolation
• Support web management, SNMP System Overview PE24-240 is an advanced PoE switch providing a network point for data transmission and power supply. It has 24 PoE ports that can provide standard IEEE802.3af/at power supply through network cables. Because of the advanced self-sensing algorithm for supplying power over IEEE802.3af/at, the connected PoE or non-PoE standard equipment is safely protected.
- Sensor: Z-ID Fingerprint Sensor
- Single gang Standard junction box installation.
- RS485 Communication Interface.
- Stainless Steel Front casing.
- Protection level of IP65; fully dust tight and resistant to water splashes from any direction.
- Flush-Mounted Design for neat installation.
Supported Devices: Standalone Device with Attendance PUSH Protocol: Green Label Series
- Authentication Options: Fingerprint / Face / Palm / RFID / Pin
- Max. Supported Devices: 500 Devices (Please contact us for more information on capacity expansion.)
- Database: PostgreSQL (Default), MSSQLServer 2005 / 2008 / 2012 / 2014 / 2016 / 2017 / 2019, MySQL 5.0 / 5.6 / 5.7 Oracle 10g / 11g / 12c /19c
- Supported OS: (64-bit only) Windows 7/8/8.1/10/11, Windows Server /2008/2008 R2/2012/2012 R2/2016/2019
- Suggested Browsers: Chrome 33+ / IE 11+ / Firefox 27+
- Easy to install and maintain
- Automatic digital line scan camera, with high-resolution color image
- Image of total vehicle undercarriage
- Flexible access control
- 20-ton axle capacity
- Advanced workstation PC
- Automatic Image Comparison
- Foreign Object Detection
- Real-time surveillance
KEY FEATURES
- 2.2-inch LCD screen size, 240 x 320 pix screen resolution
- Quick access to incoming & outgoing call logs
- Shortcut key
- Larger speaker & receiver volume, plus superior noise reductions (vs TPA60)
- Built-in Bluetooth*
- Quick charge
- Fast firmware upgrade
KEY FEATURES
- 3.5" colour LCD display
- 18 flexible function keys
- 4 soft keys
- HD wideband audio (G.722)
- Headset jack
- Optima HD voice
- Supports expansion modules (Skype for Business)
- 1 USB 2.0 ports, supports USB headset
- Flexible upgradability of device applications for Teams or SfB users.
- 7" 1024 x 600 capacitive touch screen
- Connectivity Type: IP/VoIP
- Communications Protocol: SIP
- Line Appearances: 16
- Soft Keys: 4
- Ethernet Ports: 2x 10/100/1000 Gigabit
- PoE: 802.3af Class 0