- Wireless Distance: 100m (no obstacle)
- Wireless Protocol: 802.11 b/g/n 2.4GHz Wi-Fi, RF 433MHz, GSM, b/g/n 2.4GHz Wi-Fi, RF 433MHz, GSM
- GSM Frequency Band: 850/900/1800/1900MHZ
- Sound Intensity: 100 dB
- Maximum Sub-device Quantity: 24 detectors (including PIR & Door Sensor) + 10 remote controls
- Power Supply: DC 5V/1A
- Backup Battery: DC 7.4V Lithium Battery (5 hours standby time)
- 7.4V Lithium Battery (5 hours standby time)
- Trigger Distance: 15mm
- Battery Type: 12V 23A
- Remote Control– Battery Type: CR2016
• 24*10/100M RJ-45(PoE) +2*10/100M RJ-45+2*1000 SFP
• Complies with IEEE 802.3, IEEE 802.3u and IEEE802.3af/at
• Maximum PoE power is 15.4 W (IEEE 802.3af )/ 30 W (IEEE 802.3at)
• 250 meters PoE power and data transmission distance (Cat 6)
• MDI/MDIX self-adaption
• Store and forward switching
• Lightning protection
The PE162-200-C is an advanced switch that provides a network point for data transmission and power supply.
It has 16 PoE ports that can provide IEEE802.3af/at standard power through network cables.
The PE082-120-C is an advanced switch that provides a network point for data transmission and power supply.
It has 8 PoE ports that can provide IEEE802.3af/at standard power through network cables.
The PE041-55-C is an advanced switch that provides a network point for data transmission and power supply.
It has 4 PoE ports that can provide IEEE802.3 af/at standard power through network cables.
• Commercial standard switch with 2 layers of network artribute
• 250 meters of PoE transmission distance of power and data
• Max. PoE power output 30W for each port
• Conforms to IEEE 802.3i, IEEE 802.3u and IEEE 802.3X
• Conforms to IEEE 802.3af and IEEE 803.3at
• MDI/MDIX self-adaptation
• Lightning protection System Overview PE04-60 provides a simple network for IP cameras installation, which could run data and power transmission through CAT 5E / 6 cables at the same time. It also supports long transmission distance of 250 meters to save cost for projects to replace extenders, fibers, and coaxial cables, etc.
• Commercial standard switch with 2 layers of network artribute
• 250 meters of PoE transmission distance of power and data
• Max. PoE power output 30W for each port
• Conforms to IEEE 802.3i, IEEE 802.3u and IEEE 802.3X
• Conforms to IEEE 802.3af and IEEE 803.3at • MDI/MDIX self-adaptation
• Lightning protection System Overview PE08-120 provides a simple network for IP cameras installation, which could run data and power transmission through CAT 5E / 6 cables at the same time. It also supports long transmission distance of 250 meters to save cost for projects to replace extenders, fibers, and coaxial cables, etc.
• 24 10 / 100BaseT RJ45 ports
• 2 sets of 10 / 100 / 1000M gigabyte combo ports
• The total power budget is 400W, and the max. PoE power output is 30W
• Support IP-MAC-Port-VID binding ARP / IP / DoS defend, 802.1X authentication
• Support IEEE802.1Q VLAN, OoS, ACL, spanning-tree, and multicast
• Support port security, port monitoring, port isolation
• Support web management, SNMP System Overview PE24-240 is an advanced PoE switch providing a network point for data transmission and power supply. It has 24 PoE ports that can provide standard IEEE802.3af/at power supply through network cables. Because of the advanced self-sensing algorithm for supplying power over IEEE802.3af/at, the connected PoE or non-PoE standard equipment is safely protected.
· Support 1080p HD dual streaming
· Friendly and intuitive GUI
· Wireless transmission up to 120m
· Real-time Wi-Fi transmission without delay
· Zero configuration between NVR and IP cameras pairing
· Built-in smart human detection function
· One-click enabling remote monitoring through Cloud
· Suitable for the outdoors (IP66 for IP cameras).
- 1/2.7″ CMOS Sensor
- 3MP (2304*1296)@16fps
- H.265 / H.264
- Motion/Human Detection
- 3.6 mm lens
- IR Light Distance 5-20m
- White Light Distance 5-20m
- 340° horizontal and 90° vertical
- Built-in Mic & Speaker
- Cloud Storage/TF Card Slot/Echo show & Google assistant optional
- USB Camera
- 1080P (1920×1080@30fps) HD camera
- USB2.0 connectivity, for a fast, easy connection
- General UVC protocol, drive-free installation
- Built-in MIC, support Audio & Video recording
- Support 360° rotation, tripod, plastic casing
- 4CH Wi-Fi NVR, 1 SATA
- 482MP Wi-Fi IP Camera, H.265
- 3.6mm lens
- IR distance 20m
- Wi-Fi connection, plug-n-play
- Human body detection
- Suitable for the outdoors (IP66 for IP Cameras)
- Easy to install and maintain
- Automatic digital line scan camera, with high-resolution color image
- Image of total vehicle undercarriage
- Flexible access control
- 20-ton axle capacity
- Advanced workstation PC
- Automatic Image Comparison
- Foreign Object Detection
- Real-time surveillance