· Remote control
· Simple installation and use
· In and out count
· TCP / IP communication
· Excellent anti-interference ability and stability
· 500 adjustable sensitivity level
· Supports various language interface customization
· Higher accuracy and verification speed
· Pass count and Alarm count memory function
Dimension | 410(L) X 85(W) X 45(H) mm |
Power voltage | standard 9V battery |
Operating voltage | 7V-9V |
Operating Current | <50mA |
Alarm terms | sound (vibration) and light alarm simultaneously |
Waterproof | IP31 |
Alarm Sound | ≥75dB(A) |
Operation Frequency | 40KHz |
• 24*10/100M RJ-45(PoE) +2*10/100M RJ-45+2*1000 SFP
• Complies with IEEE 802.3, IEEE 802.3u and IEEE802.3af/at
• Maximum PoE power is 15.4 W (IEEE 802.3af )/ 30 W (IEEE 802.3at)
• 250 meters PoE power and data transmission distance (Cat 6)
• MDI/MDIX self-adaption
• Store and forward switching
• Lightning protection
The PE162-200-C is an advanced switch that provides a network point for data transmission and power supply.
It has 16 PoE ports that can provide IEEE802.3af/at standard power through network cables.
The PE082-120-C is an advanced switch that provides a network point for data transmission and power supply.
It has 8 PoE ports that can provide IEEE802.3af/at standard power through network cables.
The PE041-55-C is an advanced switch that provides a network point for data transmission and power supply.
It has 4 PoE ports that can provide IEEE802.3 af/at standard power through network cables.
[wpdm_package id='5856']
- Model:1 Gang: SW11-US 2 Gang: SW12-US 3 Gang: SW13-US
- Input Voltage: AC 100-240V 50/60Hz
- Output Voltage: AC 90-250V 50/60Hz
- Maximum Current: 10A
- Rated Power: 600W/gang
- Standby Power Consumption :< 0.5W/h
- Wireless Protocol: 802.11 b/g/n 2.4GHz Wi-Fi
- Material: PC flame resistant material
- Dimensions: 76*120*30mm
- Certifications: FCC
- Working Humidity: ≤ 95%
- Working Temperature: -20°C ~ 70°C
Material: PC+ABS
Electrical: Input 100 - 240V AC, 50/60Hz
Maximum Load: 10A Resistive
Maximum Power: 2400W
Wireless Protocol: 802.11 b/g/n 2.4GHz
• Commercial standard switch with 2 layers of network artribute
• 250 meters of PoE transmission distance of power and data
• Max. PoE power output 30W for each port
• Conforms to IEEE 802.3i, IEEE 802.3u and IEEE 802.3X
• Conforms to IEEE 802.3af and IEEE 803.3at
• MDI/MDIX self-adaptation
• Lightning protection System Overview PE04-60 provides a simple network for IP cameras installation, which could run data and power transmission through CAT 5E / 6 cables at the same time. It also supports long transmission distance of 250 meters to save cost for projects to replace extenders, fibers, and coaxial cables, etc.
• Commercial standard switch with 2 layers of network artribute
• 250 meters of PoE transmission distance of power and data
• Max. PoE power output 30W for each port
• Conforms to IEEE 802.3i, IEEE 802.3u and IEEE 802.3X
• Conforms to IEEE 802.3af and IEEE 803.3at • MDI/MDIX self-adaptation
• Lightning protection System Overview PE08-120 provides a simple network for IP cameras installation, which could run data and power transmission through CAT 5E / 6 cables at the same time. It also supports long transmission distance of 250 meters to save cost for projects to replace extenders, fibers, and coaxial cables, etc.
• 24 10 / 100BaseT RJ45 ports
• 2 sets of 10 / 100 / 1000M gigabyte combo ports
• The total power budget is 400W, and the max. PoE power output is 30W
• Support IP-MAC-Port-VID binding ARP / IP / DoS defend, 802.1X authentication
• Support IEEE802.1Q VLAN, OoS, ACL, spanning-tree, and multicast
• Support port security, port monitoring, port isolation
• Support web management, SNMP System Overview PE24-240 is an advanced PoE switch providing a network point for data transmission and power supply. It has 24 PoE ports that can provide standard IEEE802.3af/at power supply through network cables. Because of the advanced self-sensing algorithm for supplying power over IEEE802.3af/at, the connected PoE or non-PoE standard equipment is safely protected.
- 1/2.7″ CMOS Sensor
- 3MP (2304*1296)@16fps
- H.265 / H.264
- Motion/Human Detection
- 3.6 mm lens
- IR Light Distance 5-20m
- White Light Distance 5-20m
- 340° horizontal and 90° vertical
- Built-in Mic & Speaker
- Cloud Storage/TF Card Slot/Echo show & Google assistant optional
- USB Camera
- 1080P (1920×1080@30fps) HD camera
- USB2.0 connectivity, for a fast, easy connection
- General UVC protocol, drive-free installation
- Built-in MIC, support Audio & Video recording
- Support 360° rotation, tripod, plastic casing
- 4CH Wi-Fi NVR, 1 SATA
- 482MP Wi-Fi IP Camera, H.265
- 3.6mm lens
- IR distance 20m
- Wi-Fi connection, plug-n-play
- Human body detection
- Suitable for the outdoors (IP66 for IP Cameras)
- Easy to install and maintain
- Automatic digital line scan camera, with high-resolution color image
- Image of total vehicle undercarriage
- Flexible access control
- 20-ton axle capacity
- Advanced workstation PC
- Automatic Image Comparison
- Foreign Object Detection
- Real-time surveillance
- Structure: 4 Pairs Twisted
- Conductor sizes of 24 AWG available
- 85 to 115 Ohm impedance available
- High-purity oxygen-free copper conductor
- Customized PVC outer sheath
- Rated temperature range of -20 to +60C
- Wires Speces 4*2*0.5(mm)
- Structure: 4 Pairs Twisted
- Conductor: Oxygen-Free Copper
- Insulation: HDPE
- Jacket: PVC
- Rated Temperature: 0~70°C
- Reference Standard: YD/T1019-2013; ISO/IEC 11801; ANSI/TIA/ETA 568-B
- Structure: 4 Pairs Twisted
- Conductor: Oxygen-Free Copper
- Insulation: HDPE
- Jacket: PVC
- Rated Temperature: 0~70°C
- Reference Standard: YD/T1019-2013; ISO/IEC 11801; ANSI/TIA/ETA 568-B
Constructions of 4 pairs twisted cables
Conductor sizes of 24 AWG available
Copper-clad aluminium conductor
Customized PVC outer sheath
Rated temperature range of -20 to +60C
Wires Speces 4*2*0.5(mm)