- Sensor: ZK small-sized sensor
- Communication: RS485
- Standard Functions: ID Card Module
- Optional Functions: IC Card Module
- Voice Prompt: Buzzer
- Power Supply: 12V DC
- Operating Temperature: 0°C ~ 45°C
- Ingress Protection Rating: IP65
- Dimension: 102 x 50 x 37mm (H*W*D)
4MP Motorized Lens Bullet IP Camera
- 1/3” CMOS sensor
- H.265 dual-stream encoding
- High-quality optical lens: 2.8-12mm
- 50m IR effective range
- Built-in PoE
- Multiple web browsers supported
- Remote viewing with mobile application or VMS
- Lightning protection up to 6KV
- Achieve IP67 protection rating for waterproof and dustproof
- Aluminium alloy casing
- · 1/3” CMOS sensor
- H.265 dual-stream encoding
- High-quality optical lens: 6mm
- 30m IR effective range
- Built-in PoE
- Multiple web browsers supported
- Remote viewing with mobile application or VMS
- Lightning protection up to 6KV · Achieve IP67 protection rating for waterproof and dustproof · Aluminium alloy casing
- 1/3” CMOS sensor
- H.265 dual-stream encoding
- High-quality optical lens: 6mm
- 30m IR effective range
- Built-in PoE & Microphone
- Multiple web browsers supported
- Remote viewing with mobile application or VMS
- Lightning protection up to 6KV
- Achieve IP67 protection rating for waterproof and dustproof
- Aluminium alloy casing
- · 1/3” CMOS sensor
- H.265 dual-stream encoding
- High-quality optical lens: 3.6mm
- 30m IR effective range
- Built-in PoE
- Multiple web browsers supported
- Remote viewing with mobile application or VMS
- Lightning protection up to 6KV
- Achieve IP67 protection rating for waterproof and dustproof
- Aluminium alloy casing
Image sensor: 1/2.8 inch CMOS.
Resolution: 5.0 Megapixels.
Image compression standard: H.265 / H.264.
Lens: 2.8mm.
Full Color function allows the camera to observe color images 24/24.
Infrared vision range: 20 meters.
Support face recognition algorithm.
Motion detection function.
DWDR digital anti-backlight function.
3D-DNR digital noise reduction function.
Built-in Microphone.
Support remote viewing by mobile application or VMS.
Support power supply over PoE network.
Dust and water resistant standard: IP67 (suitable for indoor and outdoor use).
Resolution: 5MP
· 1/3” CMOS sensor
· H.265 dual-stream encoding
· High-quality optical lens: 3.6mm
· 30m IR effective range
· Built-in PoE
· Multiple web browsers supported
· Remote viewing with mobile application or VMS
· Lightning protection up to 6KV
· Achieve IP67 protection rating for waterproof and dustproof
· Aluminium alloy casing
· 1/2.9” 2MP CMOS sensor
· H.265 dual stream encoding
· High quality optical lens 3.6mm
· IR effective range 20m
· Built-in PoE
· Embedded face detection algorithm
· Support White/Black list alarm deployment
· Intelligent video analytics function supported
· Multiple web browsers supported
· Support P2P cloud remote viewing by Mobile Application/VMS
· Lightning protection up to 6KV
· Metal casing compliance with IP67 standard
• 24*10/100M RJ-45(PoE) +2*10/100M RJ-45+2*1000 SFP
• Complies with IEEE 802.3, IEEE 802.3u and IEEE802.3af/at
• Maximum PoE power is 15.4 W (IEEE 802.3af )/ 30 W (IEEE 802.3at)
• 250 meters PoE power and data transmission distance (Cat 6)
• MDI/MDIX self-adaption
• Store and forward switching
• Lightning protection
The PE162-200-C is an advanced switch that provides a network point for data transmission and power supply.
It has 16 PoE ports that can provide IEEE802.3af/at standard power through network cables.
The PE082-120-C is an advanced switch that provides a network point for data transmission and power supply.
It has 8 PoE ports that can provide IEEE802.3af/at standard power through network cables.
The PE041-55-C is an advanced switch that provides a network point for data transmission and power supply.
It has 4 PoE ports that can provide IEEE802.3 af/at standard power through network cables.
- Sensor: ZKTeco Infrared Optical Sensor
- Communication: RS485
- Built-in Card Reader: 125 kHz EM card reader, Optional IC Card reader
- Optional Functions: IC Card Module
- Power Supply: DC 12V
- Operating Temperature: 0°C ~ 45°C
- Operating Humidity: 20% ~ 80%
- Dimension: 88mm × 88mm × 33.6mm
Material: PC+ABS
Electrical: Input 100 - 240V AC, 50/60Hz
Maximum Load: 10A Resistive
Maximum Power: 2400W
Wireless Protocol: 802.11 b/g/n 2.4GHz
• Commercial standard switch with 2 layers of network artribute
• 250 meters of PoE transmission distance of power and data
• Max. PoE power output 30W for each port
• Conforms to IEEE 802.3i, IEEE 802.3u and IEEE 802.3X
• Conforms to IEEE 802.3af and IEEE 803.3at
• MDI/MDIX self-adaptation
• Lightning protection System Overview PE04-60 provides a simple network for IP cameras installation, which could run data and power transmission through CAT 5E / 6 cables at the same time. It also supports long transmission distance of 250 meters to save cost for projects to replace extenders, fibers, and coaxial cables, etc.
• Commercial standard switch with 2 layers of network artribute
• 250 meters of PoE transmission distance of power and data
• Max. PoE power output 30W for each port
• Conforms to IEEE 802.3i, IEEE 802.3u and IEEE 802.3X
• Conforms to IEEE 802.3af and IEEE 803.3at • MDI/MDIX self-adaptation
• Lightning protection System Overview PE08-120 provides a simple network for IP cameras installation, which could run data and power transmission through CAT 5E / 6 cables at the same time. It also supports long transmission distance of 250 meters to save cost for projects to replace extenders, fibers, and coaxial cables, etc.
• 24 10 / 100BaseT RJ45 ports
• 2 sets of 10 / 100 / 1000M gigabyte combo ports
• The total power budget is 400W, and the max. PoE power output is 30W
• Support IP-MAC-Port-VID binding ARP / IP / DoS defend, 802.1X authentication
• Support IEEE802.1Q VLAN, OoS, ACL, spanning-tree, and multicast
• Support port security, port monitoring, port isolation
• Support web management, SNMP System Overview PE24-240 is an advanced PoE switch providing a network point for data transmission and power supply. It has 24 PoE ports that can provide standard IEEE802.3af/at power supply through network cables. Because of the advanced self-sensing algorithm for supplying power over IEEE802.3af/at, the connected PoE or non-PoE standard equipment is safely protected.
- Sensor: Z-ID Fingerprint Sensor
- Single gang Standard junction box installation.
- RS485 Communication Interface.
- Stainless Steel Front casing.
- Protection level of IP65; fully dust tight and resistant to water splashes from any direction.
- Flush-Mounted Design for neat installation.
- 1/2.7″ CMOS Sensor
- 3MP (2304*1296)@16fps
- H.265 / H.264
- Motion/Human Detection
- 3.6 mm lens
- IR Light Distance 5-20m
- White Light Distance 5-20m
- 340° horizontal and 90° vertical
- Built-in Mic & Speaker
- Cloud Storage/TF Card Slot/Echo show & Google assistant optional
- USB Camera
- 1080P (1920×1080@30fps) HD camera
- USB2.0 connectivity, for a fast, easy connection
- General UVC protocol, drive-free installation
- Built-in MIC, support Audio & Video recording
- Support 360° rotation, tripod, plastic casing